Switching LumaSoothe 1 Treatment Modules
Switching LumaSoothe 1 Treatment Modules is as easy as press of a button!
![](https://lumasoothe.com/wp-content/uploads/2017/05/help_helpfulguide__switch_treatments-turn_off.jpg)
Before switching treatments please ensure that your LumaSoothe unit is turned off. The ON/OFF indicator light should be off.
![](https://lumasoothe.com/wp-content/uploads/2017/05/help_helpfulguide__switch_treatments-press_and_hold.jpg)
Press and hold the “Treatment Release Button” (White button) located above the USB charging port.
![](https://lumasoothe.com/wp-content/uploads/2017/05/help_helpfulguide__switch_treatments-pull-apart.jpg)
While holding the Treatment Release Button, remove the current light therapy module by pulling it apart for the unit.
![](https://lumasoothe.com/wp-content/uploads/2017/05/help_helpfulguide__switch_treatments-pick_treatment.jpg)
![](https://lumasoothe.com/wp-content/uploads/2017/05/help_helpfulguide__switch_treatments-insert.jpg)
After selecting the appropriate Treatment Module for your pets condition, align the treatment label (DT or ST) with the Treatment Release Button and Insert.
- Please pay close attention while changing treatments as the treatment label / white arrow must line up with the treatment release button.
- Treatment heads should be connected as tight as possible, if connected loosely they will not function properly.
Happy to help.
If you have any questions, comments please contact us!